1.multi-function key
mains switch
Press the power on in the shutdown state.
Press the power-on for about 3 seconds, and turn off when the display displays
OFF.
Displays the switch
Press quickly on to switch to display the carrier frequency (XXX.X MHz) or thechannel code(FnXX).
Infrared send
With a long press for about 1 second, when the display displays theSEND, the infrared light sends frequency data.(consult C.)
2 display screen
3 Power Indicators
Three grids indicate plenty of electricity;
Two bright grids indicate less than half of the power
A shining case indicates that almost no power, the use time may be lessthan 30 minutes;
If only the battery frame is shiny, which means that the battery is about torun out, there is the possibility of automatic shutdown at any time.
4.frequency / channel / function indication
5. RF signal indication
The indicator turns on when the receiver receives an RF signal from the wireless
microphone.
6.frequency / channel up / automatic search key
Press and release simultaneously and the receiver enters a manual FM state
(reference D.).
Press the button for approximately 3 seconds, and the receiver enters the